Main Product >> Geared Motor >> Dinamic Oil Technical Data This small range covers from 800 Nm to 3.500 Nm maximum torque. The models are suitable for track drives and for wheel drives applications because of the relatively high load supported by the bearings (8.000 kg in the EH models). Several accessories are available (including static brake,[…]
Main Product >> Geared Motor >> Dinamic Oil Technical Data This range covers from 80.000 to 900.000 Nm of maximum torque, equivalent to machine weights of 30 – 300 Tons (excavator) or 100 – 450 Tons (cranes). The models are designed with ground gears and steel case and carriers in order to be the best solution for[…]
Main Product >> Geared Motor >> Dinamic Oil Technical Data This range covers from 5.000 Nm to 400.000 Nm nominal torque. It comprises rotating case gearboxes designed to fit inside the winch drum. In order to ensure an isostatic distribution of the load on the winch, the gearbox is designed with a single supporting bearing. The external[…]
Main Product >> Geared Motor >> Dinamic Oil Technical Data This standard range covers from 3.000 Nm to 160.000 Nm nominal torque, however special solutions are available for torque values up to 2.000.000 Nm. The gearboxes have a compact design and a strong output support suitable for applications with high radial loads. Each model can be supplied[…]
Main Product >> Geared Motor >> Kumera The Covera worm gearbox series is designed especially for non-continuous operation. Thanks to its Concave – Convex tooth profile it can take higher peakloads than conventional profiled worm gears. The reason Covera tooth profile is stronger than a conventional worm tooth profile is that the surface pressure is spread on[…]
Main Product >> Geared Motor >> Kumera The SF-, SG-, E-gearbox series are specifically designed for vertical shaft applications for high external loads. These ranges include in total 30 gear unit sizes, which are optimally divided to meet required torque ranges, ratios and shaft end load requirements. Technical data : Nominal torque rating 0,5 – 850 kNm[…]
Main Product >> Geared Motor >> Kumera Kumera LX-gearbox series is specifically designed for fast rotating shafts such as roll applications. The range includes 16 gear unit sizes which are optimally divided to meet required torque ranges and ratio requirements. Integrated lubrication canals and gear wheels manufactured with high accuracy have resulted in compact dimensions with high[…]
Main Product >> Geared Motor >> Kumera Kumera Multi Stage Helical and Bevel-Helical gearbox range includes 20 gearbox sizes from two- to five-stages. The range consist of F-, G- and D-series which are optimally divided to meet the torque and ratio requirements. All the sizes are available in helical and bevel-helical versions and can be equipped with[…]
Main Product >> Geared Motor >> Rossi Universal mounting with feet integrated with the body. High, reliable and tested performances. Compactness, standardized dimensions and compliance with standards. Standardized motor according to IEC. Solid and seamless cast iron one-piece body. Large internal space between gear train and body. Possibility to install particularly powerful motors and transmit high nominal[…]
Main Product >> Geared Motor >> Rossi Gearmotors with high interchangeability (hollow low speed shaft diameters). Universal mounting with lower feet, integral with housing, and B14 flange on 2 faces. Basic design; compactness and economy. IEC standardized motor. High, reliable and tested performances (Ni bronze); optimization of worm gear pair performances (ZI involute profile and adequately conjugate[…]